1. Return Policy
  2. Re-stocking Fee
  3. Deliveries and Acceptance
  4. Invoicing and Payment
  5. Change Order
  6. Termination for Convenience of Customer
  7. Force Majeure
  8. Hold Harmless; Indemnity
  9. Protective Film Storage & Usage Considerations
  10. Practical Considerations

Surface Armor LLC warrants to its Customer that its products are free of defects in materials and workmanship. In the event of a defective product, Surface Armor’s sole responsibility shall be to replace the defective product, or, at its option, refund the purchase price of the product. IN NO EVENT SHALL SURFACE ARMOR, LLC BE LIABLE FOR LOSS OR DAMAGES, WHETHER DIRECT, INDIRECT, INCIDENTAL OR CONSEQUENTIAL. Customer is solely responsible for determining the suitability of products for Customer’s desired use. There are no other warranties of any kind whatsoever, neither expressed nor implied. Warranty claims must be submitted within 6 months from the date of product shipment.


If a Surface Armor LLC product is determined by Surface Armor to be defective, a Return Authorization number will be issued, along with instructions for returning the product. Surface Armor LLC reserves the right to inspect the product or require a sample of the product proposed to be returned, prior to authorizing the return of the product. All product considered for return must have been stored and handled in accordance with the terms hereof, including the return of product(s) within six (6) months from the date of shipment to the customer.


Occasionally, customers may ask to return a product due to an over-stock issue or they find that a product requirement has changed making their film inventory obsolete. At its sole option, Surface Armor may agree to purchase back un-used inventory that is within 90 days of the shipment date. A restocking fee, ranging from 20% to 50%, may be assessed, depending upon the age of the inventory and whether it is a custom or standard product. Customer is responsible for return shipping costs.


Surface Armor will deliver the goods by the date specified on a Sales Order or in accordance with the Delivery Schedule provided by the customer. All goods ordered shall be deemed accepted by Customer prior to the placing the order, with exception of any goods that fall out of the warranties listed above. In such case Surface Armor will cover the cost of replacing the goods (including shipping and handling fees).

Unless the customer in accordance with the section six (6) cancels the Sales Order, customer is obligated to purchase all the Goods ordered in accordance with the attached Delivery Schedule, or by the Sales Order Expiration Date which (unless specified otherwise) is the “Ship Date” on the Sales Order or the last “Ship Date” listed on the Delivery Schedule. In the event the customer does not purchase all the goods by the Sales Order Expiration date this Sales Order will be considered Cancelled For Convenience Of Customer and the section six (6) terms will apply.


The price of the Goods or Services is the price stated on the face of a Sales Order (the “Price”). Surface Armor will invoice customer for the order at the time the order is shipped. Unless otherwise stated in the order, customer shall pay all invoiced amounts due to Surface Armor in accordance with the payment terms stated on the invoice.

In an event any of the information on the invoice is in dispute, the customer is obligated to inform the Surface Armor no later than twenty (20) business days from the invoice date, about such dispute. The parties shall seek to resolve all such disputes expeditiously and in good faith. Surface Armor shall continue performing its obligations under the order notwithstanding any such dispute. Payment of an invoice is not evidence or admission that the goods or services meet the requirements of the order.


Customer may, from time to time, initiate changes by issuing to Surface Armor written notices (each, a “Change Order”) that alter, add to, or deduct from the Goods or Services ordered, but that are otherwise subject to the Terms and Conditions of this Limited Warranty. Both parties need to agree to such alterations.


Customer has the rights to cancel a Sales Order at any time without a reason. Cancelation notice should be sent via mail (2007-A Industrial Blvd. Rockwall, TX 75087) or email ( The date when the notice is delivered to Surface Armor shall be the Cancelation Date. In the event of Sales Order cancelation, Surface Armor shall immediately stop all work hereunder, and shall immediately cause any of its suppliers or subcontractors to cease such work. By canceling a Sales Order, customer agrees to reimburse Surface Armor for all goods specifically purchased by Surface Armor (up to the Cancelation Date) to fulfill the Sales Order, plus any applicable sales taxes and shipping fees. Surface Armor agrees to ship all such goods to the customer within twenty (20) business days of the Termination Date. Surface Armor shall not be paid for any work done after the termination date, or for any costs incurred by Surface Armor’s suppliers or subcontractors, which Surface Armor could reasonably have avoided.


Neither customer nor Surface Armor shall be liable to the other party for any delay or failure in performing its obligations under a Sales Order to the extent that such delay or failure is caused by an event or circumstance that is beyond the reasonable control of that party, without such party’s fault or negligence, and which by its nature could not have been foreseen by such party (“Force Majeure Event”). Force Majeure Events include, but are not limited to, acts of God or the public enemy, government restrictions, floods, fire, earthquakes, explosion, epidemic, war, invasion, terrorist acts, riots, strike, or embargoes. Surface Armor’s economic hardship or changes in market conditions are not considered Force Majeure Events. Surface Armor shall use all diligent efforts to end the failure or delay of its performance, ensure that the effects of any Force Majeure Event are minimized and resume performance under the order.


Customer shall defend, indemnify, and hold harmless Surface Armor and it’s parent company, its subsidiaries, affiliates, successors or assigns and its respective directors, officers, shareholders, and employees (collectively, “Indemnitees”) against any and all loss, injury, death, damage, liability, claim, action, judgment, interest, penalty, cost or expense, including reasonable attorney and professional fees and costs, and the cost of enforcing any right to indemnification hereunder (collectively, “Losses”) arising out of or occurring in connection with Surface Armor’s performance of its obligations or negligence, willful misconduct or breach of the Terms of a Sales Order or possession of the goods infringes or misappropriates the patent, copyright, trade secret or other intellectual property right of any third party. Customer shall not enter into any settlement without Surface Armor’s or Indemnitee’s prior written consent.


As with most raw materials, protective film inventories should be rotated: first-in – first-out, within a six month period from their date of purchase. Adhesives and plastics do age, especially if they are exposed to environmental extremes. Aged films can perform poorly.


  • Store film inventory in original packaging/shipping cartons until needed.
  • Store within a temperature range of 40-90 degrees F.
  • Store within a relative humidity range of 30% – 80%.
  • Keep away from exposure to temperature extremes, direct sunlight, water, solvent and other contaminants.

Protected surface storage

  • For best results, do not store film-protected surfaces for longer than six months. Removal issues can occur after extended periods of time.
  • Maintain storage temperature range of 40-90 degrees F.
  • Maintain in relative humidity range of 30% – 80%.
  • Keep away from direct sunlight, water, solvents and contaminants.


The acrylic adhesives employed in Surface Armor films and tapes have “pressure-sensitive adhesives,” abbreviated as PSA. The tack, or stickiness, of each product is formulated to adhere to certain surface types for a practical period of time, typically 6 months, unless otherwise stated. Protective films are easily removed and don’t leave behind any stains or adhesive residue.

“Pressure-sensitive” implies that some amount of pressure must be applied to the film in order for it to stick to the intended surface. In most cases, simply wiping one’s hand, a squeegee, or a laminating roller across the surface of the film is all that it takes. In general, it’s advisable to apply a consistent degree of pressure across the entire surface area of the film, as opposed to just pressing on the corners or along the edges. To be effective, it doesn’t have to be a work of art that is totally free of air bubbles and wrinkles. It just has to stick to the surface to be protected until you are ready to take it off. However, if the protective film is to be removed by the consumer (that is, the person paying for the underlying product) it is important to have a neat, clean, professional appearance.

“Pressure-sensitive” also implies that some care is required in storing rolls of protective film. Larger, heavier rolls are shipped with plastic padplugs tucked into the ends of the roll’s core. These suspension plugs keep the roll from resting on its side which could cause pressure hot-spots. Adhesive hot-spots could make it difficult to remove the product from the roll at time of application. So, do keep those padplugs and continue to use them to store rolls in their cartons. This will help keep your products fresh and well-behaved.

The “sensitivity” of adhesives can be negatively affected by variables, such as:

  • UV Radiation – Sunlight can have a dramatic effect on interior-rated pressure sensitive adhesives. If an interior rated film is used on an exterior surface, there is considerable risk of having the film baked onto the surface. Also, note that exterior grade films will be rated for a specific time frame, such as: 90 days, 180 days, 365 days. Films left on for longer than the rated time frame may become difficult to remove and/or leave and adhesive residue behind.
  • Wet Surfaces – Adhesives don’t typically stick to water, much less to surfaces which may be coated with detergents, solvents, oil, grease, etc. If necessary clean and dry the intended surface before applying a protective film.
  • Dirty Surfaces – Adhesives stick to dirt really well. But if there is a lot of dirt or dust on your target surface, the adhesive may never come in contact with the surface to be protected. Films applied to dusty surfaces will typically fall off or be blown off by a slight breeze. If applying film at a construction job site, it’s best to apply films before the sheet rocker gets started with the sander.
  • Low Temperatures –Below 45 degrees Fahrenheit, adhesives probably won’t adhere well, if at all, to the intended surface. For best results, apply protective films when the temperature of the workplace, as well as the target surface, are both well above 45 degrees. Once applied, temperature extremes are less of an issue, at least, until it’s time to remove the film. Getting frozen films to let go of a surface may be difficult and hazardous to the protected surface. So, for ease of removal, the film and the surface should be above 45 degrees when the film is removed.
  • High Temperatures – If applied above 95 degrees Fahrenheit, adhesives can become more fluid in nature and attach themselves more readily, perhaps too readily, to surfaces. This is particularly noticeable on carpeting. (To ensure ease of removal, replace carpet protection film sooner than the suggested 45 days, if it is frequently exposed to high temperatures, direct sunlight, heavy foot traffic, and high pressure, such as: spike heels, feet of furniture, wheels of carts/moving dollies, scissor lifts, etc.) When adhesives are hot and more fluid there is a greater risk of the adhesive separating from the carrier film and leaving residue deposits on the surface. Additionally, thinner films might stretch too much during the removal effort and tear into strips as opposed to coming off in one, efficient, piece.

When removing an overly stuck, or any high-tack film, peel it back over itself vs. pulling it straight away from the surface … that helps prevent pulling up the surface or pulling paint or coatings off).

极速飞艇官方网址 澳洲幸运8官方开奖 澳洲10开奖官网 澳洲5开奖平台 SG飞艇开奖结果直播